Hi Shantonu,
XFree86 looks better but still no luck. After exec startx I can see
only:
XFree86 Version 4.5.0 / X Window System
(protocol Version 11, revision 0, vendor release 6600)
Release Date: 16 March 2005
If the server is older than 6-12 months, or if your hardware is
newer than the above date, look for a newer version before
reporting problems. (See http://www.XFree86.Org/FAQ)
Operating System: Darwin Apple Computer, Inc.
Could not find keymapping file USA.keymapping.
Reading keymap from the system.
Display mode: IOKit
Hardware cursor not supported.
Screen 0 added: 1024x768 @ (0,0)
Fatal server error:
Could not build a valid keymap.
OsVendorFatalError
AbortDDX
Quitting XDarwin...
xinit: Server error.
end nothing else. I did copied /usr/X11R6/lib/X11/xinit/xinitrc to
~/.xinitrc before.
Thanks,
Mikhail.
Shantonu Sen wrote:
The "xorg" darwinport is broken, and has not been patched to
compile with either gcc 3.3 or gcc 4.0. The "XFree86" darwinport
should work fine though. Try it out.
The symptom you describe of empty files is exactly the bug I fixed
in the XFree86 port.
Shantonu
On Jun 21, 2005, at 1:21 PM, Mikhail Paremski wrote:
Sorry, of course I meant Xorg, just a typo. Actually I believe
it is a port problem, because all man pages are just empty files
and it looks like X server is not installed at all. May be I need
to compile and install Xorg source distribution.
Thanks,
Mikhail.
Yann Garnier wrote:
Well, first you have to know that I'm new to darwin .....
But from what I learn on my linux box the command is "Xorg --
configure" (capital X)
I guess you already try with capital X but that was just to be
more accurate.
I'm afraid I have no clues to help you Mikhail .... My Darwin
experience is very (too) poor ....
Sorry,
Le 21 juin 05 à 21:39, Mikhail Paremski a écrit :
Hi Yann,
It is good question. There is no such file in whole system.
What is correct place and how to create this file? On my
Freebsd 5.4 box I could type xorg --configure, copy result to
/etc/X11 and I'm done. What about Darwin? There is no xorg
file in a system. May I borrow xorg.conf some where for my
Compaq D510?
Thanks,
Mikhail.
Yann Garnier wrote:
Hi Mikhail,
Could you give us more details about your xorg.conf file ????
Cordially,
Yann Garnier
Le 21 juin 05 à 20:57, Mikhail Paremski a écrit :
There is no .xinitrc in my home directory and /etc/X11/
xinit/ xinitrc file is empty after xorg port install.
OK. I've installed windowmaker from a port and created
simple .xinitrc like this:
exec wmaker
Nothing changed. In my best knowledge even without .xinitrc
xinit has to start X server "X" with blank screen and
mouse pointer on it. Instead if it xinit complains that
there is no "X" server in my path. But there is no X in
whole file system!
Thanks,
Mikhail
Scott C. Lemon wrote:
Do you have a .xinitrc in your home directory?
Scott C. Lemon
-----Original Message-----
From: darwin-x86-bounces
+scott.lemon=email@hidden
[mailto:darwin-x86-bounces
+scott.lemon=email@hidden]
On Behalf Of Mikhail Paremski
Sent: Monday, June 20, 2005 7:44 PM
To: email@hidden
Subject: Xorg port setup problem
Hi,
I just have installed Darwin 8.0.1 and Xorg port. Then wen
I tried to startx nothing happened:
~ root# startx
~ root#
If I try xinit then:
~ root# xinit
xinit: No such file or directory (errno 2): no server "X"
in PATH
Use the -- option, or make sure that /usr/X11R6/bin is in
your path and that
"X" is a program or a link to the right type of server for
your display.
Possible server names include:
Xorg X.Org displays
XDarwin Darwin/Mac OS X IOKit displays
XDarwinQuartz Mac OS X Quartz displays
XDarwinStartup Auto-select between XDarwin and XDarwinQuartz
xinit: Server error.
Some additional information:
~ root# uname -a
Darwin dhcp-171-69-47-20.cisco.com 8.0.1 Darwin Kernel
Version 8.0.1: Fri Apr 29
~ root# port installed
The following ports are currently installed:
xorg X11R6.8.2_0+puredarwin (active)
~ root# echo $PATH
/bin:/sbin:/usr/bin:/usr/sbin:/usr/X11R6/bin:/opt/local/bin
~ root# ls -C /usr/X11R6/bin/[Xx]*
/usr/X11R6/bin/Xmark /usr/X11R6/bin/xlogo
/usr/X11R6/bin/Xnest /usr/X11R6/bin/xlsatoms
/usr/X11R6/bin/Xprt /usr/X11R6/bin/
xlsclients
/usr/X11R6/bin/Xvfb /usr/X11R6/bin/xlsfonts
/usr/X11R6/bin/x11perf /usr/X11R6/bin/xmag
/usr/X11R6/bin/x11perfcomp /usr/X11R6/bin/xman
/usr/X11R6/bin/xauth /usr/X11R6/bin/xmessage
/usr/X11R6/bin/xbiff /usr/X11R6/bin/xmh
/usr/X11R6/bin/xcalc /usr/X11R6/bin/xmkmf
/usr/X11R6/bin/xclipboard /usr/X11R6/bin/xmodmap
/usr/X11R6/bin/xclock /usr/X11R6/bin/xmore
/usr/X11R6/bin/xcmsdb /usr/X11R6/bin/xon
/usr/X11R6/bin/xconsole /usr/X11R6/bin/
xphelloworld
/usr/X11R6/bin/xcursor-config /usr/X11R6/bin/
xplsprinters
/usr/X11R6/bin/xcutsel /usr/X11R6/bin/
xprehashprinterlist
/usr/X11R6/bin/xditview /usr/X11R6/bin/xprop
/usr/X11R6/bin/xdm /usr/X11R6/bin/
xpsimplehelloworld
/usr/X11R6/bin/xdpyinfo /usr/X11R6/bin/
xpxthelloworld
/usr/X11R6/bin/xdriinfo /usr/X11R6/bin/xrandr
/usr/X11R6/bin/xedit /usr/X11R6/bin/xrdb
/usr/X11R6/bin/xev /usr/X11R6/bin/xrefresh
/usr/X11R6/bin/xeyes /usr/X11R6/bin/xrx
/usr/X11R6/bin/xfd /usr/X11R6/bin/xset
/usr/X11R6/bin/xfindproxy /usr/X11R6/bin/xsetmode
/usr/X11R6/bin/xfontsel /usr/X11R6/bin/
xsetpointer
/usr/X11R6/bin/xfs /usr/X11R6/bin/xsetroot
/usr/X11R6/bin/xfsinfo /usr/X11R6/bin/xsm
/usr/X11R6/bin/xft-config /usr/X11R6/bin/xstdcmap
/usr/X11R6/bin/xfwp /usr/X11R6/bin/xterm
/usr/X11R6/bin/xgamma /usr/X11R6/bin/ xtrapchar
/usr/X11R6/bin/xgc /usr/X11R6/bin/xtrapin
/usr/X11R6/bin/xhost /usr/X11R6/bin/ xtrapinfo
/usr/X11R6/bin/xinit /usr/X11R6/bin/xtrapout
/usr/X11R6/bin/xkbbell /usr/X11R6/bin/
xtrapproto
/usr/X11R6/bin/xkbcomp /usr/X11R6/bin/
xtrapreset
/usr/X11R6/bin/xkbevd /usr/X11R6/bin/
xtrapstats
/usr/X11R6/bin/xkbprint /usr/X11R6/bin/xvidtune
/usr/X11R6/bin/xkbvleds /usr/X11R6/bin/xvinfo
/usr/X11R6/bin/xkbwatch /usr/X11R6/bin/xwd
/usr/X11R6/bin/xkill /usr/X11R6/bin/xwininfo
/usr/X11R6/bin/xload /usr/X11R6/bin/xwud
~ root#
~ root# find / -name X -print
~ root#
Any ideas?
Mikhail.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Darwin-x86 mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/darwin-x86/ scott.lemon
% 40humanxtensio
ns.com
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Darwin-x86 mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/darwin-x86/garnier- yann
% 40wanadoo.fr
This email sent to email@hidden
----------------------------------------------------------------
-- -- -- -----------------
Wanadoo vous informe que cet e-mail a ete controle par
l'anti- virus mail. Aucun virus connu a ce jour par nos
services n'a ete detecte.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Darwin-x86 mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/darwin-x86/mparem%
40cisco.com
This email sent to email@hidden
------------------------------------------------------------------
-- -- -----------------
Wanadoo vous informe que cet e-mail a ete controle par l'anti-
virus mail. Aucun virus connu a ce jour par nos services n'a
ete detecte.
Cordially,
Yann Garnier
email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Darwin-x86 mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/darwin-x86/mparem% 40cisco.com
This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Darwin-x86 mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/darwin-x86/ssen%
40opendarwin.org
This email sent to email@hidden
