[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: darwin x86 boot problem

Subject: RE: darwin x86 boot problem
From: "Michel CHABANNE" <email@hidden>
Date: Thu, 3 May 2001 12:18:46 +0200

Hello again

>Hello
>
>Again i have the same problem....
>Booting ISO image on an 430TX mobo, with one ATA master drive
>and one ATA master CDROM on two channels, i keep getting
>message about "spurious interrupt" when loading the ATA driver
>for the second channel.
>
>What does it mean ? Incoptibility with de chipset ? Boot
>parameter to be changed ??
>
>Please help.
>
>Michel.

>> Mmm, could it be that Darwin x86 doesn't understand the jumper settings
>> of your CDRom player? Check if it's master, slave, cable select or
whatever.

>> Greetz,

>> Dennis van Turnhout

Ok i checked it out... My CD drive is master on his own channel.
Do you think the fact that the 2 IDE channels are enabled is a
problem for the kernel ?

Thanx

Michel.

Prev by Date: Re: Darwin 1.3.1 on beige G3 won't boot : OF says "no bootable HFS partition"
Next by Date: Re: FreeBSD port collection
Previous by thread: RE: darwin x86 boot problem
Next by thread: change keymap under Darwin
Index(es):
- Date
- Thread

Home