On Oct 30, 2007, at 11:34 PM, James Nierodzik wrote: True, but perhaps for some other reason he needs to.. he mentioned in his original post that he was using one so if he did have to go through that route I felt he should at least know his options :D James Nierodzik Systems Administrator
Firestar Communications 211 E. Ontario St., Suite 700 Chicago, IL 60611 (312) 649.0900 x134
On Oct 30, 2007, at 10:02 PM, jeff donovan wrote:
On Oct 30, 2007, at 10:52 PM, James Nierodzik wrote: Because you are using a fibre channel switch though you need to use lun masking as you said or set up zones on your switch... I would recommend the later.
Sent from my iPhone
you don't need the fiber channel switch unless you add a 3 xserve.
you can use the fiber switch, both volumes will be accessible to each xserve. it's just like expanding the bus. you can setup share points with ACL's to control who connects to what. |
