Dear community group,
Thanks a lot for all comments so far!
DSS should be able to stream requested local saved content
and at the 3rd IP address incoming broadcasts from a live
encoder by ONLY using the 3rd IP address. There is no
"internal IP", "NAT",... It's a single standalone server
with (external) 3 IP addresses.
So DSS should ONLY listen to the 3rd IP because e.g. on
the 2nd IP address other services including Windows Media
Services are also getting other incoming broadcasts with
no controls about their used ports...
Not sure but why should DSS need localhost? If not needed
for both usage scenarios I would like to turn it off.
Any idea how to disable all other IPs except the 3rd IP?
Thanks a lot in advance!
Christian
> Christian:
>
> Localhost is always going to be used. This is important for streaming
> relays, and reflected streams. The 6970/71 ports are used for
> incoming broadcast from a live encoder (on the even port) and send
> status back to the encoder (odd port). This way you can reflect a
> live stream on one of those IPs. That can be useful if you have an
> internal NAT'd address, and want to reflect a live stream to an
> external IP address. Note that the server is only listening on TCP
> ports on "333.333.333.333" and 127.0.0.1. Those are the only
> addresses that will respond to streaming clients.
>
> -George
>
> > Dear community group,
> >
> >
> > Based on a fresh first time installation I ONLY changed
> > <PREF NAME="bind_ip_addr" >333.333.333.333</PREF> where
> > 333.333.333.333 is my 3rd IP address reserved for DSS.
> > So other services running on the same windows server 2003
> > using ONLY the 1st and 2nd IP address are not interfered!
> >
> >
> > DSS is running with PID#1516 at Windows Task-Manager.
> > Looking at "netstat -a -n -o" I see PID#1516 at this lines...
> >
> > Active connections
> > Proto Local Address Remoteaddress Status PID
> > TCP 333.333.333.333:80 0.0.0.0:0 ABHÖREN 1516
> > TCP 333.333.333.333:554 0.0.0.0:0 ABHÖREN 1516
> > TCP 333.333.333.333:7070 0.0.0.0:0 ABHÖREN 1516
> > TCP 333.333.333.333:8000 0.0.0.0:0 ABHÖREN 1516
> > TCP 333.333.333.333:8001 0.0.0.0:0 ABHÖREN 1516
> > TCP 127.0.0.1:80 0.0.0.0:0 ABHÖREN 1516
> > TCP 127.0.0.1:554 0.0.0.0:0 ABHÖREN 1516
> > TCP 127.0.0.1:7070 0.0.0.0:0 ABHÖREN 1516
> > TCP 127.0.0.1:8000 0.0.0.0:0 ABHÖREN 1516
> > TCP 127.0.0.1:8001 0.0.0.0:0 ABHÖREN 1516
> > UDP 111.111.111.111:6970 *:* 1516
> > UDP 111.111.111.111:6971 *:* 1516
> > UDP 222.222.222.222:6970 *:* 1516
> > UDP 222.222.222.222:6971 *:* 1516
> > UDP 333.333.333.333:6970 *:* 1516
> > UDP 333.333.333.333:6971 *:* 1516
> > UDP 127.0.0.1:6970 *:* 1516
> > UDP 127.0.0.1:6971 *:* 1516
> >
> >
> > I am not sure why I also see my 1st and 2nd IP address
> > also captured by DSS but next to the 127.0.0.1 (don't
> > want to stream to the server's LCD nor intranet!!!) I
> > REALLY would like to see DSS ONLY using the 3rd IP.
> >
> > Looking forward to hearing from you!
> > Thanks a lot in advance!
> >
> > Christian
> >
> >
> >> Just modify the "bind_ip_addr" where 123.123.123.1 = YOUR IP
> >>
> >> Example:
> >> <PREF NAME="bind_ip_addr" >123.123.123.1</PREF>
> >>
> >> If you want to use multiple IPs for DSS use the list prefix:
> >> <LIST-PREF NAME="bind_ip_addr" TYPE="char">
> >> <VALUE>123.123.123.1</VALUE>
> >> <VALUE>123.123.123.2</VALUE>
> >> </LIST-PREF>
> >>
> >> cheers
> >>
> >> Paul
> >>
> >>
> >>> Dear community group,
> >>>
> >>>
> >>> There are several lines that refer to "IP" at
> >>> C:\Program Files\Darwin Streaming Server\streamingserver.xml
> >>>
> >>> <PREF NAME="bind_ip_addr" >0</PREF>
> >>>
> >>> <PREF NAME="do_report_http_connection_ip_address" TYPE="Bool16"
> >>>> false</PREF>
> >>>
> >>> <PREF NAME="alt_transport_src_ipaddr" ></PREF>
> >>>
> >>> <PREF NAME="ip_allow_list" >127.0.0.*</PREF>
> >>>
> >>> <PREF NAME="IPAccessList" >127.0.0.*</PREF>
> >>>
> >>> The question is which ones should be changed to the
> >>> mentioned third IP address (or are there additional
> >>> config files to edit) so that DSS is only listening
> >>> to requests coming over that specific IP and also
> >>> provide content (whatever protocol) only over this
> >>> 3rd IP address.
> >>>
> >>> Note: All 3 IP addresses are internet IP's with no
> >>> router, firewall, NAT,... between. No other service
> >>> will interfere DSS at the 3rd IP address.
> >>>
> >>>
> >>> Thanks a lot in advance!
> >>>
> >>> Christian
> >>>
> >>>
> >>>
> >>>> Dear community group,
> >>>>
> >>>> I'm running DARWIN streaming server on a single
> >>>> windows server 2003. I configured 3 IP addresses.
> >>>>
> >>>> - The first IP address is used by http web service
> >>>> - The second is used for Windows Media Services
> >>>> (http, mms, rtsp streaming over port 80)
> >>>> - The third IP address should be used by the
> >>>> DARWIN streaming server service.
> >>>>
> >>>> I wonder how I can tell the DARWIN service ONLY to
> >>>> listen to the third IP and NOT interfere with services
> >>>> running on other IP addresses at the SAME server.
> >>>>
> >>>> Thanks a lot in advance for giving me a helping hand.
> >>>>
> >>>> Yours,
> >>>>
> >>>> Christian
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Streaming-server-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/streaming-server-users/email@hidden
This email sent to email@hidden
