On Oct 30, 2007, at 10:29 PM, Chad Morris wrote:
Sorry I didnt clarify. This is an Xserve RAID. They are the two
controllers and on the one side I have an existing RAID 5 array.
On the other side I put in 4 more disks and am formatting them as a
raid 5 set as well.
I would like one Xserve to access the array on one side and the
other Xserve to access the array on the other side exclusivley. No
Xsan is involved.
<snip>
Okay easy.
thats the default config setup.
configure you controller in raid admin.
then create an array go through steps 1 through 3
you'll have 2 RAID level 5 sets ( thats default out of the box )
plug in your fiber channel cables one to each xserve. boot the
xserve first then the RAID. it should mount as a big fat drive.
-j
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Macos-x-server mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/macos-x-server/email@hidden
This email sent to email@hidden
