Just tried Junxion with a gamepad and quartz still isn't seeing midi,
although now quartz sees 'junxion port 1' as a possible input... This
must be something with my machine? Any suggestions? Trash
preferences?? Is there a new version of quartz i'm missing (2.0)???
help.
thanks,
Brandon
On 7/24/05, Brandon Morse <email@hidden> wrote:
> I'm having the same issue. All of my midi software seems to see both
> my radium-61 and my midisport 2x2 with no problems. When I try it out
> in Quartz, I simply see 'port1.' I've tried midipipe, but still get
> no data after changing the port to midipipe's output. Have also tried
> the same thing with MAX. I've just downloaded the most recent drivers
> for the devices, but this was no help either.
>
> thanks,
> Brandon
>
>
> On 7/24/05, Alessandro sabatelli <email@hidden> wrote:
> > i haven't had problems w/ my behringer bcf2000, but i have had to
> > "reset" my midi inputs in qc from time to time by unpicking then
> > picking the source.
> >
> > i wonder if it's that i've opened them w/o the bcf2000 connected and then saved.
> > would this be the case?
> >
> > for the time being if a device is not showing up in qc but is showing
> > up in midipipe then
> > you just pipe your data through midipipe.
> >
> > On 7/20/05, Pierre-Olivier Latour <email@hidden> wrote:
> > > > I'm having a weird issue with midi devices and not sure whether to
> > > > log it as a bug yet wanted
> > > > to see if anyone had seen something similar.
> > > >
> > > > I have two midi devices, a Hercules DJ console which I use through
> > > > Steim JunXion and works
> > > > fine with Quartz Composer. Then I have an Evolution X Session UC
> > > > 17. The evolution is not
> > > > seen at all by Quartz Composer. When I attach it and run QC it
> > > > only comes up with "port 1" "port 2" in
> > > > the controller list while with other applications it appears as "EV
> > > > EX USB".
> > > >
> > > > This controller works fine with Grid Pro, Midi Monitor, Midi Pipe
> > > > etc so I know it's all connected
> > > > and working fine, QC is just not seeing it.
> > >
> > > Make sure you start QC _after_ connecting the controller. What you
> > > are observing is curious as QC does not filter MIDI sources in any way.
> > >
> > > ________________________________________________________
> > > Pierre-Olivier Latour email@hidden
> > > Quartz Composer Architect Graphics & Imaging Team
> > >
> > > _______________________________________________
> > > Do not post admin requests to the list. They will be ignored.
> > > Quartzcomposer-dev mailing list (email@hidden)
> > > Help/Unsubscribe/Update your Subscription:
> > > http://lists.apple.com/mailman/options/quartzcomposer-dev/email@hidden
> > >
> > > This email sent to email@hidden
> > >
> > _______________________________________________
> > Do not post admin requests to the list. They will be ignored.
> > Quartzcomposer-dev mailing list (email@hidden)
> > Help/Unsubscribe/Update your Subscription:
> > http://lists.apple.com/mailman/options/quartzcomposer-dev/email@hidden
> >
> > This email sent to email@hidden
> >
>
>
> --
> brandon_morse
> email@hidden
>
> http://www.coplanar.org
>
--
brandon_morse
email@hidden
http://www.coplanar.org
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Quartzcomposer-dev mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
http://lists.apple.com/mailman/options/quartzcomposer-dev/email@hidden
This email sent to email@hidden
