[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: ReadPipe() problems

Subject: Re: ReadPipe() problems
From: Barry Twycross <email@hidden>
Date: Mon, 14 Feb 2005 10:20:36 -0800
Delivered-to: email@hidden
Delivered-to: email@hidden

At 5:38 PM -0700 2/13/05, Rhoads Hollowell wrote:

A quick look in USB.h shows that 0xe0004003 is a data toggle error, meaning that device probably sent the next packet of data on the wrong data toggle. Can you check the analzer to make sure that the data toggle is toggling appropriately on the device end?

I hadn't looked up the error yet, but I was going to suggest that the observed behaviour is consistent with the device not toggling its data toggles. I suspect all the packets would show up with DATA0 pids. -- Barry Twycross email@hidden --- USB, it's not a Dyslexic BUS. (Thanks to TC.) _______________________________________________ Do not post admin requests to the list. They will be ignored. Usb mailing list (email@hidden) Help/Unsubscribe/Update your Subscription: http://lists.apple.com/mailman/options/usb/email@hidden

This email sent to email@hidden

References:
	>ReadPipe() problems (From: Juan Pablo Pertierra <email@hidden>)
	>Re: ReadPipe() problems (From: Rhoads Hollowell <email@hidden>)

Prev by Date: Re: Continous isochronous transfer, high bandwidth transactions
Next by Date: Re: Continous isochronous transfer, high bandwidth transactions
Previous by thread: Re: ReadPipe() problems
Next by thread: Porting USB Driver from Mac OS 9 to Mac OS X
Index(es):
- Date
- Thread

Home