Re: AUGD: Re: Lost Gigabytes
Re: AUGD: Re: Lost Gigabytes
- Subject: Re: AUGD: Re: Lost Gigabytes
- From: "Dave N" <email@hidden>
- Date: Wed, 28 Feb 2007 08:37:33 -0800
1) Just make sure you read the Hi-Cap instructions carefully!
You Must Not cross the 128 gb line!
2) If you opt for the PCI ATA133 card (not the ATA66 which doesn't
support large drives), know that you will have to format the drive, and
it will ONLY be readable when connected to the PCI ATA card. This goes
for the Sonnet Tech cards, and probably all/most of the others. But it
will let you put a huge drive in your old G4, as a single volume.
Best,
Dave Nathanson
Mac Medix
in reply to (email@hidden), Anthony D. Saxton's message of 8:07 PM, 2/27/07
>You have an earlier G4 that doesn't directly support larger than
>128GB (132GB) drives. Not to dismay, there is a patch that will allow
>OSX to access the remainder of the drive. It's called "ATA Hi-Cap
>Support" and is available from Intech Software at http://
>www.speedtools.com/ATA6.shtml
>
>Anthony D. Saxton
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Augd mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden