Re: Time to measure ECI2002 with a Spectroscan?
Re: Time to measure ECI2002 with a Spectroscan?
- Subject: Re: Time to measure ECI2002 with a Spectroscan?
- From: Thomas Holm/pixl <email@hidden>
- Date: Wed, 30 Nov 2005 09:38:18 +0100
On 30/11/2005, at 8.37, Graeme Gill wrote:
I came across one comment that the i0 needs a chart with spacers
to recognize the patches - if that were the case, it's hard to
figure how they could fit an ECI2002 into one page.
I've actually measured some old ECI2002R presssheets formatted for
the spectrolino. Granted I had to make 6 or 7 lines with a fine felt
marker between similar colours (change white lines to black) to have
it read without errors. It took me a whole 4-5 minutes figuring out
which they were.
The custom designed IO charts does indeed fit on two sheets sized
15,6x27,18cm.
Is this in fact the case, or is the i0 like the SpectroScan,
and capable of reading arbitrarily positioned patches ?
It reads in scan mode like the old Eye one, so it can't measure
things without spaces if adjacent colours are too similar.
Best Regards
Thomas Holm / Pixl Aps
- Colour Management Consultant
- Seminars speaker and tutor on CM and Digital Imaging etc.
- Apple Solutions Expert
- Member, ColorManagementGroup.com
- www.pixl.dk ยท email@hidden
--
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden