Problems with Atkinson profiles on an Epson 9600
Problems with Atkinson profiles on an Epson 9600
- Subject: Problems with Atkinson profiles on an Epson 9600
- From: Tim Vitale <email@hidden>
- Date: Thu, 08 Sep 2011 20:48:01 -0700
- Importance: Normal
In the past I have always found Bill Atkinson's "9600 profiles" to be the
answer to my problems.
Recently I have been getting very dark results. I have tried many
solutions, not the least of which, was to use PM4.1 Profile Editor to make
"Global Correction" lightening of the profile itself. While this has some
value, it is not "good" and I've never needed to go this direction before.
I have even tried the profiles Epson shipped with the printer; no joy there
as you might imagine. The results were even darker.
I have begun to wonder if my printer could just be "darkening" everything.
This does not seem to make sense. Has anyone run into this?
The machine had new heads and a general tune-up about 2 years ago.
TX
Tim Vitale
Paper and Photographs Conservator
Oakland, CA
510-594-82877
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden