[Fed-Talk] CAC Reader and G5
[Fed-Talk] CAC Reader and G5
- Subject: [Fed-Talk] CAC Reader and G5
- From: John Niles <email@hidden>
- Date: Wed, 22 Dec 2004 13:26:19 -0500
Troops,
I recently purchased two 2.5 Ghz G-5 units. After using the G-5
transfer setup, both machines are working fine (except for Virtual PC 6
of course).
However, in the past week I attempted to verify my CAC setup. I was
unsuccessful. I transferred the same card reader that works in the G-4
to the G-5. I then loaded the Smart Card application, but nothing
happens when I insert a card. The system profiler says the reader is
there and correctly identifies it, but it does not respond at all when
I insert a card (I borrowed other individual's cards as well to test).
When I return the reader to the G-4, the reader works fine with the
Smart Card application as before and immediately recognizes the card
and asks for a password, then reads the card. Both the G-4's and the
G-5's are using OS 10.3.7.
Help!
John
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Fed-talk mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden