Re: [Fed-Talk] 64k CAC issues
Re: [Fed-Talk] 64k CAC issues
- Subject: Re: [Fed-Talk] 64k CAC issues
- From: Brian Raymond <email@hidden>
- Date: Tue, 14 Feb 2006 17:58:05 -0500
- Thread-topic: [Fed-Talk] 64k CAC issues
I have a flashed ActivCard 2.0 reader running the SCM 5.18 firmware and it
works fine on 10.4.4. When I was running older SCM firmware I had all sorts
of problems in 10.4 however that was with a 32k card, which you indicate
doesn't cause you problems.
My only suggestion would be to verify you are running the 5.18 firmware in
case it addresses some issues with 64k cards. I would have to reread them
for specifics but some of the emails today from Sean seem to indicate it's
possible an older driver could be carried forward, which might also explain
some issues with 64k cards and 10.4
- Brian
On 2/14/06 3:29 PM, "Brian Cadwell" <email@hidden> wrote:
> Greetings,
>
> We are just now beginning to run into issues with people using newly issued
> 64k CAC on their Macs. I don't have a 64k card to test with so I'm
> scrambling to find some information. The basic symptom is that on a system
> running 10.4.4 and using a "flashed" ActivCard USB Reader V2.0... the user
> inserts the card and the light does not flash. The same set up works fine
> with the previous generation CAC.
>
> Looking through the fed-talk archives for information about 64k
> compatibility, I noted one person indicated a problem and one person
> indicated no issues.
>
> If you report success can you indicate the specific set up you're using?
>
> bc
> _______________________________________________
> Do not post admin requests to the list. They will be ignored.
> Fed-talk mailing list (email@hidden)
> Help/Unsubscribe/Update your Subscription:
>
> This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Fed-talk mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden