Re: [Fed-Talk] CAC on Mac OS X (Leopard)
Re: [Fed-Talk] CAC on Mac OS X (Leopard)
- Subject: Re: [Fed-Talk] CAC on Mac OS X (Leopard)
- From: Paul Nelson <email@hidden>
- Date: Mon, 23 Feb 2009 14:38:53 -0600
- Thread-topic: [Fed-Talk] CAC on Mac OS X (Leopard)
Title: Re: [Fed-Talk] CAC on Mac OS X (Leopard)
This is not due to ADmitMac for CAC, but due to the firmware version in your SCR 331. Your card reader would not work on ANY version of 10.5.x until the firmware is updated, and 10.5.6 is installed.
The only reason some people were able to get the SCR 331 to work AFTER 10.5.0 and BEFORE 10.5.6 was by using third party drivers supporting the Oberthur card. The Oberthur card and SCR 331 combo was not supported by Apple software until 10.5.6 and only then with the firmware update for the reader.
These third party drivers do not cause something to STOP working when installing 10.5.6.
Paul Nelson
Thursby Software Systems, Inc.
From: "abram.morman" <email@hidden>
Date: Mon, 23 Feb 2009 14:52:06 -0500
To: Joe <email@hidden>, Paul Nelson <email@hidden>
Cc: Apple Fed Talk <email@hidden>
Subject: Re: [Fed-Talk] CAC on Mac OS X (Leopard)
As long as you are NOT using any third-party software, like ADmitMac for CAC, then you will be able to continue using your CAC card and reader with no problem. But if you do use third party then upgrading to 10.5.6 will most likely make your card reader cease to exist with Oberthur ID One v5.2 CAC card and the SCR 331 and 3310 USB CAC readers. I can verify this on more than one computer.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Fed-talk mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden