Re: [Fed-Talk] OSX 10.9 losing network access after sleep
Re: [Fed-Talk] OSX 10.9 losing network access after sleep
- Subject: Re: [Fed-Talk] OSX 10.9 losing network access after sleep
- From: Glen Henshaw <email@hidden>
- Date: Wed, 06 Nov 2013 10:27:14 -0500
Yes, I *have* (but do not typically use) Cisco AnyConnect Client. As far as I can tell, it does not auto-run on boot.
Glen
Glen Henshaw, PhD • Roboticist • U.S. Naval Research Laboratoryoffice: 202-767-1196 • google voice/mobile: 443-295-3050
On Nov 5, 2013, at 7:10 PM, William Cerniuk < email@hidden> wrote: Have seen this symptom when Cisco software has been resident in the TCP stack chain, especially when using the Cisco VPNClient but also with Cisco AnyConnect as well.
Any Cisco software loaded? On Nov 5, 2013, at 17:29, Glen Henshaw < email@hidden> wrote: Hi all,
I’m having an issue with Mavericks not being able to see its network after a sleep/wake cycle. This apparently is more prevalent on machines with statically defined IP addresses, and might be due to the system saving power by releasing router connections during a sleep (?), and those connections don’t get renewed with the local router afterwards. There’s no Apple forum discussion I can find, but the following MacRumors forum discussion seems to describe what I’m seeing perfectly:
Wondering if anyone else has seen this, and if so what you did about it.
Thanks, Glen
Glen Henshaw, PhD • Roboticist • U.S. Naval Research Laboratory
|
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Fed-talk mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden