Hello, This is a dump of my hciconfig hci0: Type: BR/EDR Bus: UART BD Address: 00:18:34:26:4E:40 ACL MTU: 1021:4 SCO MTU: 180:4 UP RUNNING PSCAN ISCAN RX bytes:1130 acl:5 sco:0 events:58 errors:0 TX bytes:1091 acl:5 sco:0 commands:40 errors:0 Features: 0xff 0xff 0x2d 0xfe 0x9b 0xff 0x79 0x83 Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 Link policy: RSWITCH HOLD SNIFF PARK Link mode: SLAVE ACCEPT Name: 'dm365-evm-0' Class: 0x080620 Service Classes: Capturing Device Class: Imaging, Camera HCI Version: 2.1 (0x4) Revision: 0x0 LMP Version: 2.1 (0x4) Subversion: 0x1d1f Manufacturer: Texas Instruments Inc. (13) This is a dump from sdptool browse of our accessory bluetooth from my PC Browsing 00:18:34:26:4E:40 ... Service Name: Wireless iAP Service Description: iAP over RFCOMM Service Provider: Company Inc Service RecHandle: 0x10000 Service Class ID List: UUID 128: 00000000-deca-fade-deca-deafdecacafe Protocol Descriptor List: "L2CAP" (0x0100) "RFCOMM" (0x0003) Channel: 1 Language Base Attr List: code_ISO639: 0x656e encoding: 0x6a base_offset: 0x100 Profile Descriptor List: "Serial Port" (0x1101) Version: 0x0100 thanks, Paul _______________________________________________ Do not post admin requests to the list. They will be ignored. Bluetooth-dev mailing list (Bluetooth-dev@lists.apple.com) Help/Unsubscribe/Update your Subscription: https://lists.apple.com/mailman/options/bluetooth-dev/site_archiver%40lists.... This email sent to site_archiver@lists.apple.com We are part of the MFI program working on a linux-based imaging accessory. Running the bluez stack on the linux side, I am able to initiate , and successfully pair with an Ipad. I can also pair both ways with an Android device with no issues. However, I am not able to successfully pair when I initiate the process from the Ipad: it fails with "Device is not supported" and I don't know why. Our device class is 'Imaging, camera' and we advertise the 'Wireless iAP' service. Any suggestions or insight much appreciated.