On 2 Apr 2004, at 18:06, Scott Herz wrote: Can you set the default: defaults write com.apple.AddressBook ABDebugBT YES and send in any AB logs in /Library/Logs/Console/you/console.log Thank you. That's _very_ useful to know. So I ran the Address Book with the T610 and the T630, both with Bluetooth debug on. When I run it with the T610 I get: 2004-04-02 18:29:17.819 Address Book[16342] Telephony: Raw data in: T610 series 2004-04-02 18:29:17.822 Address Book[16342] Telephony: Using Device Command Set: <CFDictionary 0x4a49a90 [0xa01900e0]>{type = mutable, count = 13, capacity = 17, pairs = ( ... Followed by a dictionary full of modem commands and it merrily goes off and issues lots of commands to the phone. When I try the same test with the T630 I get something very different: 2004-04-02 18:24:17.344 Address Book[16337] Telephony: Raw data in: T630-T628 2004-04-02 18:24:17.400 Address Book[16337] Telephony: Raw data in: OK That's it. No dictionary of commands. No chatting to the phone. Nothing. I'm running AddressBook 3.1.1 (v301). Is this version supposed to work with the T630? Was I deluding myself into thinking that it was working before? I have to confess I never actually tried dialling outgoing calls and it's possible that AB was simply silently dropping all my SMSs without reporting anything. The command set for the two phones is more or less identical, so I would have thought it would be fine, but the dumped dictionary of commands contains references to the T610 and Z600 but not the T630. Any thoughts? Nicko _______________________________________________ bluetooth-dev mailing list | bluetooth-dev@lists.apple.com Help/Unsubscribe/Archives: http://www.lists.apple.com/mailman/listinfo/bluetooth-dev Do not post admin requests to the list. They will be ignored.