Hi Matthias, We had a lot of problems with the Ericsson Development Kits and their USB support. It would show up to the system (sometimes), and when it did our USB stack didn't seem to care for it, and thus Bluetooth never got loaded against the device. Btw, your system profiler trace was stripped off - if you could send it to me directly, that would be great. We don't support serial devices, only USB. However, an ambitious 3rd party should be able to create an HCI controller of their own to support Bluetooth PC cards, or whatever.... In fact, we'd love it if you would! jason

Hi There.

I'd like to ask for support for another BT module, the Ericcson ROK 101

007/21 Module

that we use in a self-made board. it is similar to the early Ericsson

Bluetooth Development Kits.

When I plug it in, its not recognized from the System ( Bluetooh: Not

Available in the Status Bar)

I run IORegistry and the System Profiler. Its listed there, so I assume

the module and its USB connection are working.

I'll attach the Report from the System Profiler.

Any ideas ?

I ordered two ACER modules as they are sold for US $50 each, but we have

a lot ( 20.. ) of

those Protyping-Boards that can also be used over a serial connection

( which is a little unconvenient since there are no serial ports on mac

nowadays, (ok, XServer..))

Even with this nifty keyspan usb-2-serial box, I am not able to use the

Apple BT Stack, or is it possible

to use a serial connection to access the HCI ?

Thanks,

Matthias Ringwald

ETH Z|rich

[demime 0.98b removed an attachment of type multipart/appledouble]

_______________________________________________

bluetooth-dev mailing list | bluetooth-dev@lists.apple.com

Help/Unsubscribe/Archives:

http://www.lists.apple.com/mailman/listinfo/bluetooth-dev

Do not post admin requests to the list. They will be ignored.

_______________________________________________ bluetooth-dev mailing list | bluetooth-dev@lists.apple.com Help/Unsubscribe/Archives: http://www.lists.apple.com/mailman/listinfo/bluetooth-dev Do not post admin requests to the list. They will be ignored.