What would be the best direction to go with the following press paper and proofing paper? Use uv cut filter or not. Proofing paper L*a*b* values measured without UV cut. No UV filter. L= 96.38 a= 1.83 b= -8.02 Press paper L*a*b* values measured without UV cut. No UV filter. L= 93.80 a= 1.76 b= -8.20 Both the proofing paper and the press paper appear to have optical brighteners as seen under a black light. I'm planning on doing a G7 calibration. Creating a profile of the press after G7 calibration and creating a proof to match the press using the press profile. With both papers having optical brighteners, what would be the purpose of using a UV cut filter? -- Steve Miller Color Management Specialist "Quality Begins Here" BIC Advertising & Promotional Products 1000 3rd Ave. SW Sleepy Eye, MN 56085 Tel.: (1) 507 794 8203 E-mail: slmiller@norwood.com www.norwood.com / www.bicgraphic.com CONFIDENTIALITY NOTICE This electronic message is confidential and may contain legally privileged information intended only for the use of the individual or company named above. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communications is strictly prohibited. If you have received this communication in error please immediately notify us by telephone, and return the original message to us at the address below. IRS Circular 230 Disclosure: As provided for in Treasury regulations, advice (if any) relating to federal taxes that is contained in this communication (including attachments) is not intended or written to be used, and cannot be used, for the purpose of (1) avoiding penalties under the IRS Code or (2) promotion, marketing or recommending to another party any transaction or matter addressed herein: Norwood & BIC Graphic, 14421 Myerlake Circle, Clearwater, FL 33760. www.norwood.com / www.bicgraphic.com
From: Steve Miller <SLMiller@norwood.com> Date: Tue, 17 Jan 2012 16:55:46 -0600 To: ColorSync <colorsync-users@lists.apple.com> Subject: Spectrophotometer for measuring non flat surface.
I'm looking for a spectrophotometer that can measure non flat surfaces. Small round cylinders about the size of a pencil. Is there anything on the market that is capable of this?
-- Steve Miller Color Management Specialist
"Quality Begins Here"
BIC Advertising & Promotional Products 1000 3rd Ave. SW Sleepy Eye, MN 56085
Tel.: (1) 507 794 8203 E-mail: slmiller@norwood.com www.norwood.com / www.bicgraphic.com
CONFIDENTIALITY NOTICE This electronic message is confidential and may contain legally privileged information intended only for the use of the individual or company named above. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communications is strictly prohibited. If you have received this communication in error please immediately notify us by telephone, and return the original message to us at the address below. IRS Circular 230 Disclosure: As provided for in Treasury regulations, advice (if any) relating to federal taxes that is contained in this communication (including attachments) is not intended or written to be used, and cannot be used, for the purpose of (1) avoiding penalties under the IRS Code or (2) promotion, marketing or recommending to another party any transaction or matter addressed herein: Norwood & BIC Graphic, 14421 Myerlake Circle, Clearwater, FL 33760. www.norwood.com / www.bicgraphic.com
_______________________________________________ Do not post admin requests to the list. They will be ignored. Colorsync-users mailing list (Colorsync-users@lists.apple.com) Help/Unsubscribe/Update your Subscription: http://lists.apple.com/mailman/options/colorsync-users/slmiller%40norwood.co...
This email sent to slmiller@norwood.com