Andrew und Karl are right. Andrew, for sticking to the original poster question, und Karl for "incidently" pointing out that, with some other ICC profiling package, it is as "simple" as drag and drop. The truth, as Andrew pointed out, is that "it is as simple as drag and drop too in i1Profiler". I might add that the i1Profiler interface could be daunting, at first glance, but it should be mentioned that basICColor automatic "queues" need prior setup, unless the user sticks to the default queue setups. It uses a "client-server" architecture, unlike i1Profiler and ProfileMakerPro and Argyll and many others who use a "client-client" (for lack of better term) architecture, in which the user goes through a bunch of settings, press the button and voilà!, an ICC profile. I think Karl comments was well taken ;-) BTW, Karl, what is the level of support in "CGATS" files? Do you accept various "flavors" of CGATS files? I remember not being able to directly get i1Profiler to accept some flavors of CGATS file... MfG / Roger -----Original Message----- From: colorsync-users-bounces+graxx=videotron.ca@lists.apple.com [mailto:colorsync-users-bounces+graxx=videotron.ca@lists.apple.com] On Behalf Of Andrew Rodney Sent: 9 août 2015 11:46 To: colorsync-users <colorsync-users@lists.apple.com> Subject: Re: CGATS and profiles
On Aug 9, 2015, at 7:51 AM, Karl Koch <basicc@me.com> wrote:
Since you asked for the simplest way: drag and drop your CGATS file onto basICColor dropRGB (for RGB printers) or CMYKick ( you guessed it, for printers driven with a RIP) – done!
Karl
Karl, while that's useful information, please keep in mind the question asked:
On 5 Aug 2015, at 19:30, Mike Stewart <email@hidden> wrote:
Can I create an ICC Profile from i1Profiler 1.6.1 (on the Mac) using just a CGATS file. If not; what is the simplest way to create an ICC profile from a CGATS file.
The request was for building a profile, from CGATs data using a specific product the OP appears to own already. Of course, you were not the first to suggest an alternative product that isn't the one the OP is using or asked about:
• From: Martin Orpen <email@hidden> • Date: Wed, 05 Aug 2015 22:50:00 +0100 Simplest method must be using Argyll — takes less than 10 seconds :)
Simplest method is, as I pointed out, is to drag and drop the CGATs file into the correct workflow area in the exact and specified product the OP asked about: i1Profiler. Andrew Rodney http://www.digitaldog.net/ _______________________________________________ Do not post admin requests to the list. They will be ignored. Colorsync-users mailing list (Colorsync-users@lists.apple.com) Help/Unsubscribe/Update your Subscription: https://lists.apple.com/mailman/options/colorsync-users/graxx%40videotron.ca This email sent to graxx@videotron.ca