If you care to send the characterization data my way, I could create you a profile using ColorToolbox. Have you tried Argyll? I would try to avoid editing the profile first. The other thing I would look at is the "gamut" of the device in its characterized state, it's possible that the Reds and Magentas are not "saturated" enough for the colors you want to match? I ran into a similar issue, lately, and as soon as I loosened the ink restriction on Yellow and Magenta, all of a sudden my problem was solved. Best / Roger -----Original Message----- From: colorsync-users <colorsync-users-bounces+graxx=videotron.ca@lists.apple.com> On Behalf Of zbet66--- via colorsync-users Sent: Saturday, June 22, 2019 2:36 PM To: colorsync-users@lists.apple.com Subject: Printer Profile Issue I've tried both Onyx and Xrite i1 Profiler to profile an Epson solvent printer. The profile comes out fine as far as tone and gray. The Delta E's for Reds and Magentas are over six. I also tried more sampling with the Isis spectro. The results are still the same with either profiling application. The only solution I can come up with is to purchase a profile editor. The EFI editor is a bit expensive and comes with a profile maker which I do not need. Does anyone have another possible solution to this? Randy ZauchaManaged Color _______________________________________________ Do not post admin requests to the list. They will be ignored. colorsync-users mailing list (colorsync-users@lists.apple.com) Help/Unsubscribe/Update your Subscription: https://lists.apple.com/mailman/options/colorsync-users/graxx%40videotron.ca This email sent to graxx@videotron.ca