Could you carefully cut the chart at the point where the device is asking for a second page? Then on the second page attach extra paper at the top of the chart so the Dtp70 will read it. You would want to use a very thin strip of tape on the underside of the paper. Hopefully the paper is thick enough not to have the tape effect the measurements. -- Steve Miller Color Management Specialist "Quality Begins Here" BIC Advertising & Promotional Products 1000 3rd Ave. SW Sleepy Eye, MN 56085 Tel.: (1) 507 794 8203 E-mail: slmiller@norwood.com www.norwood.com / www.bicgraphic.com CONFIDENTIALITY NOTICE This electronic message is confidential and may contain legally privileged information intended only for the use of the individual or company named above. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communications is strictly prohibited. If you have received this communication in error please immediately notify us by telephone, and return the original message to us at the address below. IRS Circular 230 Disclosure: As provided for in Treasury regulations, advice (if any) relating to federal taxes that is contained in this communication (including attachments) is not intended or written to be used, and cannot be used, for the purpose of (1) avoiding penalties under the IRS Code or (2) promotion, marketing or recommending to another party any transaction or matter addressed herein: Norwood & BIC Graphic, 14421 Myerlake Circle, Clearwater, FL 33760. www.norwood.com / www.bicgraphic.com
From: Terence Wyse <wyseconsul@mac.com> Date: Thu, 12 Apr 2012 13:28:04 -0500 To: ColorSync User List List <colorsync-users@lists.apple.com> Subject: Re: one-sheet printout vs 2-page reference file
Randy, what application are you using for measurement, Measure Tool or Colorport?
If it was designed as a single page chart from the get-go, your reference file (Measure Tool) or target xml file should reflect this. On the other hand, if someone took a two page chart and combined the TIFFs in something like Photoshop without updating the reference file/target xml, you might be hosed. At the very least it will take some serious hacking of the reference file or target xml file to get it to scan it as a single page.
Regards, Terry
On Apr 12, 2012, at 1:56 PM, Randy Norian wrote:
I am having an issue with a 2 page chart for a DTP70 that was combined into a single chart.
I have a .txt for a reference file that is requiring two pages when I scan it. It will scan the first half of the sheet and ask for the second sheet.
What do I need to modify in the reference file to make the DTP70 see this as a single chart?
_______________________________________________ Do not post admin requests to the list. They will be ignored. Colorsync-users mailing list (Colorsync-users@lists.apple.com) Help/Unsubscribe/Update your Subscription: https://lists.apple.com/mailman/options/colorsync-users/slmiller%40norwood.c...
This email sent to slmiller@norwood.com