Dear all, i have strange problem with stripe validating with EFI. In short and without exact details: one printed strip (no matter if Fogra 2/3) same device Eye1Pro revD, UVcut XF installed on Win7, eXpress installed on two computers, Win7 and on Mac, all in latest versions When i measure strip in EFI eXpress and in EFI XF, i am getting very different results. I mean values appearing on label - typically (cca) paper dE 0.73 vs 3.55, magenta 2,2 vs 4.5, same difference in yellow. Small dE (approx dE1,5) difference for K and C. Biggest values are for eXpress. Strip is 2 or more days old, i make repeated measurements in short time (in minutes, just to swap measurement unit between computers, and start software). Measurement in each application are consistent. No matter if target values are computed from profile or using included fogra definiton MK file (even if using SAME fogra definiton MK file in both apps). Note please, i am not talking about color precision of printed proof, printed sample is exactly the same for all measurements. I am hoping for answre form anybody with real access to both applications, which can repeat my test ... Best regards, KamilT