Allow me to borrow this thread to ask whether anyone has ever successfully measured a Standard IT8.7/4 Random test chart with ColorPort off a Spectroscan XY table? I tried with v2.05 that I downloaded and installed this afternoon but it is forever stuck on measuring the chart "vertically"? I could not find any option for telling the software to measure the chart rotated, horizontally, you know, the way the chart sits on the Spectroscan. Looks like the built-in IT8.7/4 Random is coded for reading off a DTP70 and that's the end of it :( Do I need a special XML file? Anyone? I have a mail into X-Rite tech support about this, in case... Best / Roger Breton -----Original Message----- From: colorsync-users-bounces+graxx=videotron.ca@lists.apple.com [mailto:colorsync-users-bounces+graxx=videotron.ca@lists.apple.com] On Behalf Of Scott Martin Sent: April-30-12 11:39 AM To: colorsync-users List Subject: ColorPort Updated to 2.0.5 FWIW, XRite has upgraded ColorPort to 2.0.5 to address some of the issues previously discussed and to support the new i1Pro2 device. Get it here: http://www.xrite.com/product_overview.aspx?ID=719&Action=support&SoftwareID= 1168 Scott Martin www.on-sight.com