Hi Steve and Terry, Curve3 has indeed been updated to work with i1Profiler. So curved VPR data and exported P2P measurements, any Curve3 export - can be imported into i1Profiler directly. Pat Herold CHROMiX

From: Steve Miller <SLMiller@norwood.com> Date: June 17, 2013 6:47:41 AM PDT To: "'colorsync-users?lists.apple.com' List" <colorsync-users@lists.apple.com> Subject: Re: Import curved VPR data from Curve2 into i1Profiler

Terry, That worked! Thanks!

Something to maybe add to Curve software? Be able to import VPR curved data directly into i1Profiler? Or, is this available in Curve3?

--

Steve Miller Color Management Specialist

"Quality Begins Here"

BIC Advertising & Promotional Products 1000 3rd Ave. SW Sleepy Eye, MN 56085

Tel.: (1) 507 794 8203 E-mail: slmiller@norwood.com www.norwood.com / www.bicgraphic.com

CONFIDENTIALITY NOTICE This electronic message is confidential and may contain legally privileged information intended only for the use of the individual or company named above. If the reader of this message is not the intended recipient, or the employee or agent responsible to deliver it to the intended recipient, you are hereby notified that any dissemination, distribution or copying of this communications is strictly prohibited. If you have received this communication in error please immediately notify us by telephone, and return the original message to us at the address below. IRS Circular 230 Disclosure: As provided for in Treasury regulations, advice (if any) relating to federal taxes that is contained in this communication (including attachments) is not intended or written to be used, and cannot be used, for the purpose of (1) avoiding penalties under the IRS Code or (2) promotion, marketing or recommending to another party any transaction or matter addressed herein: Norwood & BIC Graphic, 14421 Myerlake Circle, Clearwater, FL 33760. www.norwood.com / www.bicgraphic.com

On 14/06/2013 8:07, "Terence Wyse" <wyseconsul@mac.com> wrote:

...

Hi Steve, all you have to do is open the exported data in PM5 Measure Tool, re-save it from Measure Tool with a new name and then bring that into i1Profiler....it'll work.

When you import that file into i1Profiler, you'll likely be asked for the calibration standard (XRGA or whatever) and maybe the measurement condition (M0, M2).

Good luck!

Terry