Re: How to use i1Profiler to measure a P2P25 target
Greetings Steve, Thank you for the additional information about the P2P target. A check of my reference files shows that the values match those of the distributed P2P reference files. I have been aware of those xx.xx values in the P2P reference and have wondered if it really makes a difference between the printed results of 4.71% and the printed results of a 5% when determining gray balance curve points, at least in the flexo world that I live in. -Bill-
No wonder none of your presses matched .... Best / Roger -----Original Message----- From: colorsync-users-bounces+graxx=videotron.ca@lists.apple.com [mailto:colorsync-users-bounces+graxx=videotron.ca@lists.apple.com] On Behalf Of William Whitfield Sent: 10 mars 2015 19:03 To: ColorSync-users Subject: Re: How to use i1Profiler to measure a P2P25 target Greetings Steve, Thank you for the additional information about the P2P target. A check of my reference files shows that the values match those of the distributed P2P reference files. I have been aware of those xx.xx values in the P2P reference and have wondered if it really makes a difference between the printed results of 4.71% and the printed results of a 5% when determining gray balance curve points, at least in the flexo world that I live in. -Bill-
participants (2)
-
Roger Breton
-
William Whitfield