site_archiver@lists.apple.com Delivered-To: darwin-dev@lists.apple.com I compiled and ran a test program (see below). On 2 Oct 2006, at 10:23 AM, Marc Majka wrote: #include <asl.h> #include <string.h> int main() { aslmsg m = asl_new(ASL_TYPE_MSG); asl_set_filter(NULL, ASL_FILTER_MASK_UPTO(ASL_LEVEL_DEBUG)); asl_set(m, "Facility", "radius"); asl_log(NULL, m, ASL_LEVEL_DEBUG, "test"); return(0); } After which I tried to read the message back from the log % syslog -k Facility radius % syslog -k Level 7 % syslog -c 0 Master filter mask: Off So I compiled and ran a second test program (see below). aslclient a = asl_open(NULL, "radius", 0); asl_set_filter(NULL, ASL_FILTER_MASK_UPTO(ASL_LEVEL_DEBUG)); asl_log(a, NULL, ASL_LEVEL_DEBUG, "test"); asl_close(a); return(0); John _______________________________________________ Do not post admin requests to the list. They will be ignored. Darwin-dev mailing list (Darwin-dev@lists.apple.com) Help/Unsubscribe/Update your Subscription: http://lists.apple.com/mailman/options/darwin-dev/site_archiver%40lists.appl... I'd like to send debug messages to the asl system log on Leopard without using sudo, but haven't had any success. Here's a small test program that will also send a "test" message with the "raduis" facility: but didn't find anything. I checked to make sure the the master filter was off, and it was. If you read through the man page, you'd also find that the following code *should* work: But due to a bug in asl_open(), it doesn't. Sorry about that! The bug will be fixed in 10.5 (Leopard). That didn't work either. I searched the lists for 'ASL_LEVEL_DEBUG' but didn't come up with anything beyond the two tests above. Any ideas why neither of those two programs work on 10.5.2? Any ideas what would? This email sent to site_archiver@lists.apple.com