site_archiver@lists.apple.com Delivered-To: darwin-kernel@lists.apple.com cp xnu-1228/BUILD/obj/RELEASE_PPC/mach_kernel /mach_kernel.new cp /mach_kernel /mach_kernel.orig cp /mach_kernel.new /mach_kernel Thanks Rand _______________________________________________ Do not post admin requests to the list. They will be ignored. Darwin-kernel mailing list (Darwin-kernel@lists.apple.com) Help/Unsubscribe/Update your Subscription: http://lists.apple.com/mailman/options/darwin-kernel/site_archiver%40lists.a... I have followed Apple's instructions for building the 10.5 kernel and have successfully built mach_kernel. To install it I did the following: I've done this on a portable firewire drive so that I don't screw up by machine. The problem is that I can boot from this kernel on my TI PowerBook G4 which means that the kernel will boot, however, I am unable to boot my PowerMac G5 QUAD. I get the white screen with the apple logo, and then eventually the fans ramp up to full speed. I never see the spinning circle and holding down "command v" doesn't do anything. So, the kernel that I build does work on the TI PowerBook G4, but not on the PowerMac G5 QUAD. It was built on the PowerMac G5 QUAD using Apple's instructions. Does anyone know what I need to do to build a kernel that will boot a PowerMac G5 QUAD? Any help would be appreciated. I couldn't find anything in the list archives. This email sent to site_archiver@lists.apple.com