On Thursday, September 26, 2002, at 03:23 PM, Michael Cashwell wrote: Greetings all, I'm trying to be good and not include userland headers in my NKE. I'd think that was enlightened self-interest (since doing so would likely cause problems in your NKE and the kernel). Is that not a complete setup for doing NKEs? Do I need to download something else, possibly from the Darwin repository)? If so, what (and what tag) would ensure I get files compatible with Apple's released kernels? Roughly speaking, what you need to do is check out the appropriate version of the kernel (project 'xnu', with a tag "Apple-xxxx" matching what your kernel says (uname -a) in the form "xnu-xxxx"). Then use the headers from that kernel. Your best bet is to get the missing headers from there and put them in a convenient place, and reference them with an additional "-I" flag. If you are building for the system you are running on, it's OK to put them in the "proper" place. I've also noted that KNE samples (NKEMgr, SharedIP and TCPLogger) also don't compile due to missing system headers. We're just trying to protect you from shooting yourself in the foot with the half-cocked gun we lent you :-}. You can check the archives for discussions regarding missing headers... Regards, Justin -- /~\ The ASCII Justin C. Walker, Curmudgeon-at-Large \ / Ribbon Campaign X Help cure HTML Email / \ _______________________________________________ darwin-kernel mailing list | darwin-kernel@lists.apple.com Help/Unsubscribe/Archives: http://www.lists.apple.com/mailman/listinfo/darwin-kernel Do not post admin requests to the list. They will be ignored.