I notice your en0 iface is 169'd and your bridge has en0 as a member. On Feb 18, 2013, at 7:46 AM, Joel Reymont wrote: This is what ifconfig reports with just Internet Sharing: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 ether 14:10:9f:e0:d9:4b inet6 fe80::1610:9fff:fee0:d94b%en0 prefixlen 64 scopeid 0x4 inet 169.254.3.205 netmask 0xffff0000 broadcast 169.254.255.255 media: autoselect status: active p2p0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 2304 ether 06:10:9f:e0:d9:4b media: autoselect status: inactive en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_HWTAGGING> ether 40:6c:8f:31:cf:d1 inet6 fe80::426c:8fff:fe31:cfd1%en2 prefixlen 64 scopeid 0x6 inet 192.168.1.108 netmask 0xffffff00 broadcast 192.168.1.255 media: autoselect (1000baseT <full-duplex,flow-control>) status: active ether ac:de:48:ca:e4:4e inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255 Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 And with both Internet Sharing and OpenVPN enabled: lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 16384 options=3<RXCSUM,TXCSUM> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x1 inet 127.0.0.1 netmask 0xff000000 inet6 ::1 prefixlen 128 gif0: flags=8010<POINTOPOINT,MULTICAST> mtu 1280 stf0: flags=0<> mtu 1280 ether 14:10:9f:e0:d9:4b inet6 fe80::1610:9fff:fee0:d94b%en0 prefixlen 64 scopeid 0x4 inet 169.254.3.205 netmask 0xffff0000 broadcast 169.254.255.255 media: autoselect status: active p2p0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 2304 ether 06:10:9f:e0:d9:4b media: autoselect status: inactive en2: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 options=b<RXCSUM,TXCSUM,VLAN_HWTAGGING> ether 40:6c:8f:31:cf:d1 inet6 fe80::426c:8fff:fe31:cfd1%en2 prefixlen 64 scopeid 0x6 inet 192.168.1.108 netmask 0xffffff00 broadcast 192.168.1.255 media: autoselect (1000baseT <full-duplex,flow-control>) status: active ether ac:de:48:ca:e4:4e inet 192.168.2.1 netmask 0xffffff00 broadcast 192.168.2.255 Configuration: priority 0 hellotime 0 fwddelay 0 maxage 0 ipfilter disabled flags 0x2 member: en0 flags=3<LEARNING,DISCOVER> port 4 priority 0 path cost 0 tun0: flags=8851<UP,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1500 inet 44.1.4.18 --> 44.1.4.17 netmask 0xffffffff open (pid 11745) -------------------------------------------------------------------------- http://wagerlabs.com | @wagerlabs | http://www.linkedin.com/in/joelreymont _______________________________________________ Do not post admin requests to the list. They will be ignored. Macnetworkprog mailing list (Macnetworkprog@lists.apple.com) Help/Unsubscribe/Update your Subscription: https://lists.apple.com/mailman/options/macnetworkprog/evw%40thermeon.com This email sent to evw@thermeon.com _______________________________________________ Do not post admin requests to the list. They will be ignored. Macnetworkprog mailing list (Macnetworkprog@lists.apple.com) Help/Unsubscribe/Update your Subscription: https://lists.apple.com/mailman/options/macnetworkprog/site_archiver%40lists... This email sent to site_archiver@lists.apple.com en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 en0: flags=8963<UP,BROADCAST,SMART,RUNNING,PROMISC,SIMPLEX,MULTICAST> mtu 1500 bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 for hire: mac osx device driver ninja. kernel, usb and coreaudio drivers ---------------------+------------ +--------------------------------------- ---------------------+------------ +---------------------------------------