Re: GCR Problem
Re: GCR Problem
- Subject: Re: GCR Problem
- From: "Richard Apollo" <email@hidden>
- Date: Mon, 02 Feb 2009 13:29:16 -0600
Jon, I built a TIFF with the CMYK numbers you spec'd and ran it through my Alwan setup. I got the same values out that I put in - 27%Y, 11%K.
To get something like you described, I had to set 3 things:
1 Turn off CK-MK-YK purity
2 Bump up my black start point
3 Set the Action to "Optimize Always"
I think if you just change the Action to "Check and Optimize" you'll get what you want.
I'm using Dynamic Maximum Black. I didn't check under any of the other Separation options.
Rich Apollo
Prepress Mgr
Oklahoma Offset, Inc.
email@hidden
918-732-8168
______________________________________________________________________
This email has been scanned by the MessageLabs Email Security System.
For more information please visit http://www.messagelabs.com/email
______________________________________________________________________
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden