Re: Serial Ports and DialUpNetworking ( for the apple guys )
Re: Serial Ports and DialUpNetworking ( for the apple guys )
- Subject: Re: Serial Ports and DialUpNetworking ( for the apple guys )
- From: Bubba Giles <email@hidden>
- Date: Mon, 13 Mar 2006 16:42:47 -0800
- Thread-topic: Serial Ports and DialUpNetworking ( for the apple guys )
You can also create it with the system preferences by selecting the device,
and clicking "Edit Serial Ports". From there you can add one. You can also
do it from the old Serial Port Utility in Panther (it should still run in
Tiger).
jason
> Jason,
>
> You said "but we should still create a serial port for the device if
> it has one". Is this only if the user uses the Setup Assistant? The
> issue I am facing is, we want the user to select the device, and pair
> with it, from within out own application. We don't want to have to
> say, ok, now run the bluetooth setup assistant, configure your
> device, *dont forget to select "Use to connect to the internet
> with"*, and *then* come back to our application, and hit this button
> so we know your ready, so we can finish setting up the device
> properly. Its a horrible user experience.
>
> Is there any way to create the serial port programatically? Even a
> private API? The company I am contracting for would be willing to go
> NDA to get access to it if necessary; We have done it in the past to
> get ahold of the 802.11 API.
>
> - Morgan
>
> On Mar 13, 2006, at 2:11 PM, Bubba Giles wrote:
>
>> If a device has a serial port, we will create a tty for it in the
>> Setup
>> Assistant. Check the Bluetooth prefs, select the device in the
>> list, and
>> click "Edit Serial Ports" and you should see the TTY that was
>> created for it
>> in the list. Also, check in /dev for it. The "internet connect"
>> option in
>> the Setup Assistant configures the DUN/Serial port on the device
>> for use
>> with the "Bluetooth Modem" port that is in the Network control
>> panel, but we
>> should still create a serial port for the device if it has one.
>>
>> Jason
>>
>>
>>> So, I already know there is no way to programatically create a serial
>>> port for a given bluetooth device.... or is there?
>>>
>>> For the apple guys,
>>>
>>> Reading through the docs online, I was initially hesitant to move my
>>> "legacy" serial port code over to RFCOMM. But, after reading
>>> "Accessing Serial Ports" in "Working with Bluetooth Devices" enough
>>> times, I was convinced it would be a good idea to upgrade my code.
>>> And hey, I could use the proper bluetooth UIs. So, I updated all my
>>> serial code to RFCOMM.
>>>
>>> But then...
>>>
>>> Did you guys consider the possibility of a developer *needing* access
>>> to the standard POSIX ttys, even *with* proper bluetooth device
>>> handling? For, perhaps, internet connection software? I notice that
>>> the bluetooth setup wizard only creates a serial port if the user
>>> selects "Use this device to connect to the internet with". Did you
>>> guys ever consider, your not the only one thats going to want to do
>>> that?
>>>
>>> The application I am updating, is in fact an internet connection
>>> manager! I love the new bluetooth UIs in my application, but now
>>> that I am at the final phase of updating my code, I realized, *crap*,
>>> I STILL NEED a POSIX serial port. I need a modem path to configure
>>> in System Configuration so that my application can actually create an
>>> internet connection!!!!
>>>
>>> What do I do now?? There *must* be a way to create it. You guys are
>>> doing it...... Please advise.
>>>
>>> Sincerely
>>> Morgan
>>>
>>>
>>> _______________________________________________
>>> Do not post admin requests to the list. They will be ignored.
>>> Bluetooth-dev mailing list (email@hidden)
>>> Help/Unsubscribe/Update your Subscription:
>>> 40apple.com
>>>
>>> This email sent to email@hidden
>>
>>
>
> _______________________________________________
> Do not post admin requests to the list. They will be ignored.
> Bluetooth-dev mailing list (email@hidden)
> Help/Unsubscribe/Update your Subscription:
>
> This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Bluetooth-dev mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden