Having finally acquire a BLE adapter and gone through the NVRAM setup
and seeing that it has worked (see below, system connecting to the internal BLE,
leaving the external for the simulator), it now would appear that the simulator
is unable to see the external adapter and “turn it on”!
Running the example code [centralManager state] is consistently
returning CBCentralManagerStatePoweredOff. All attempts to use settings on the
simulator just result in the rotating (waiting for update) wheel.
The external adapter I have (from CSR, I have 2 and both behave the
same way) is obviously powered up, as there is a flashing blue light.
Where am I going wrong, are there any admin issues, perhaps my instance
of the simulator doesn’t have sufficient authority to access the external
adapter?
Using a MacBook Pro, OSX 10.8.2, Kernel version Darwin 12.2.1
Apple Bluetooth Software Version: 4.1.2f9
11046
Hardware Settings:
Address: xx-xx-xx-xx-xx-xx
Manufacturer: Broadcom
Firmware Version: v100
c5051
Bluetooth Power: Off
Discoverable: Off
Vendor ID: 0x5ac
Product ID: 0x821d
HCI Version: 6 (0x6)
HCI Revision: 5051
(0x13bb)
LMP Version: 6 (0x6)
LMP Subversion: 8804
(0x2264)
Services:
Bluetooth File Transfer:
Folder other devices can browse:
~/Public
State: Enabled
Bluetooth File Exchange:
Folder for accepted items: ~/Downloads
When other items are accepted:
Ask
When receiving items: Prompt
for each file
State: Enabled
Incoming Serial Ports:
Bluetooth-PDA-Sync:
RFCOMM Channel: 3
Requires Authentication: No
Outgoing Serial Ports:
Bluetooth-Modem:
Address:
RFCOMM Channel: 0
Requires Authentication: No
Do not post admin requests to the list. They will be ignored.
Bluetooth-dev mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden