re: Mass Monitor Profiling
re: Mass Monitor Profiling
- Subject: re: Mass Monitor Profiling
- From: Dan Reid <email@hidden>
- Date: Fri, 13 Apr 2001 10:12:25 -0600
On Thu, 12 Apr 2001 16:07:33 -0700, "Morgan Cox" <email@hidden>
wrote:
>
Other than ProveIt, are there any other products that can provide the
>
administrator style monitor calibration/profiling?
>
>
Optical would be nice, but I don't see on their site that this is an option.
>
>
Morgan
With Optical you can save out the target information and load it on each
machine so all machines are calibrated to the same standard. I have used
this approach successfully for several clients.
The Prove it! solution *requires* a colorimeter at *each* station. IF the
colorimeter is attached to screen when the administrator polls all the
machines, the administrator can determine what the base line luminance level
for all monitors. Very expensive solution. If you have 20 monitors then you
need 20 colorimeters.
I have good luck with the Optical solution. Simply hot swap the USB
colorimeter from machine to machine. Easy.
--
Dan B. Reid
RENAISSANCE PHOTOGRAPHIC IMAGING
Color Imaging Solutions Provider
http://www.rpimaging.com | email@hidden
Toll Free: (866) RGB-CMYK [ 866-742-2695 ]
Local: (505) 471-4126