RV: Xeorx Phaser 7700??
RV: Xeorx Phaser 7700??
- Subject: RV: Xeorx Phaser 7700??
- From: "Darrian Young" <email@hidden>
- Date: Tue, 4 Dec 2001 16:18:06 +0100
I think this was mistakenly sent to me and was intended for the list.
-----Mensaje original-----
De: James Steincamp [
mailto:email@hidden]
Enviado el: martes, 04 de diciembre de 2001 14:58
Para: Darrian Young
Asunto: Re: Xeorx Phaser 7700??
We have had a Xerox Phaser 7700GX for about three months and we are
generally pleased with it. In the time that we have had the printer we have
run about 12,000 prints through it... the motivation for the purchase was to
reduce the number of prints that we were running through our Epson 5500 and
to reduce our cost of consumables.
The quality of print is quite good and it is extremely fast. We use
ProfileMaker and a SpectroScan to generate the profiles and we have been
able to get it to match the Epson 5500 fairly closely. The stock profiles
that shipped with the printer were also quite good... for canned profiles
that is. All eight of our designers love the thing; especially the speed
combined with the ability to duplex.
The only issue we have had is that the PPD has a few (no color related)
flaws. Initially we were unable to generate separations from either
Illustrator or InDesign, but Xerox issued a revised PPD to address that
problem. The revised PPD however seems to want to turn black (K only) into a
four color process which makes black text look a bit out of focus. We're
working with Xerox to rectify that issue.
Hope that's helpful...
-james
>
Steven Kornreich wrote:
>
>
>
Does anyone out there know if the Xerox Phaser 7700 is a good 11x17 Color
>
laser printer?
>
Is there something better out there I should be comparing it to? I need a
>
device for short run brochures, rack cards etc. Color Sync / PS3 aware.
>
>
It is quite an impressive printer. Very good quality and very fast
(single
>
pass technology). Formats go from 10.1 x 15.2 cm to 30.4 x 45.7 cm. I
>
believe that there is a G4 inside doing the processing, and what impressed
>
me was not so much the speed of the actual printing, which is fast, but
the
>
speed with which it gobbles up large files and starts to print. Yes, it
is
>
PS3. It is Colorsync aware, but I do not know to what extent as I prefer
to
>
put iQueue in front, but I believe that someone on this list mentioned
>
something regarding this point last month. I personally do not care for
the
>
profile creation software it comes with, as it uses a scanner instead of a
>
spectrophotometer to read the charts.
>
>
Regards.
>
>
Darrian Young
>
MGV
........................................
James Steincamp
Art Department Manager
Design Master Associates, Inc.
mailto:email@hidden