RE: Best Color, where did I go wrong?
RE: Best Color, where did I go wrong?
- Subject: RE: Best Color, where did I go wrong?
- From: Ulf Grossmann <email@hidden>
- Date: Fri, 15 Jun 2001 09:41:38 +0200
Hi Jim,
nothing!!!
This effect is normal for the SP9000 (7000;5000). We from Best edit our
PaperProfiles inside the Profilingtool. nearly 90% of all canned Profiles
are created in this way. For the Epson Dye Printers with 6 Inks we reduce in
the midtone Yellow somewhere arround 3%. Sometimes it is helpfull that you
get out of the 100% point the Yellow from your Paperwhitesimulation (depends
on the ReferenceProfile you use, so this PaperProfile you should use only
with this ReferenceProfile)
Ulf Grossmann
>
-----Original Message-----
>
From: Jim Mitchell [mailto:email@hidden]
>
Sent: Thursday, June 14, 2001 2:34 PM
>
To: email@hidden
>
Subject: Best Color, where did I go wrong?
>
>
>
Okay, here's what I did. I built a custom paper Baseline /
>
linearization for Epsons HW matte. I then profiles my 9000
>
without any profiles applied, except for baseline and
>
linearization tables. I then used profile keeper to link the
>
baseline to my new 9000 icc profile. Last step, print
>
something. I set my paper and my reference profile, made sure
>
the baseline and the linearization was correct, and printed
>
out my test target. Damn! Too Yellow! I did better with the
>
default setup! What am I doing wrong???
>
>
Jim Mitchell
>
_______________________________________________
>
colorsync-users mailing list
>
email@hidden
>
http://www.lists.apple.com/mailman/listinfo/colorsync-users