Re: Creating Separations for Dai Nippon
Re: Creating Separations for Dai Nippon
- Subject: Re: Creating Separations for Dai Nippon
- From: neil snape <email@hidden>
- Date: Sun, 23 Jun 2002 22:18:16 +0200
on 23/06/2002 20:44, Dick Busher at email@hidden wrote:
>
My files are trapped by the printer's RIP, and may have adjustment
>
curves applied to them to accommodate their proofing system. They co
>
have a set of adjustment curves applied to them to accommodate their
>
plate making equipment and press conditions. Among other things, dot
>
gain is a function of screening frequency, and different curves are
>
necessary for different screening conditions, papers, inks, etc. The
>
second set is usually not applied on top of the first set, if there is a
>
first set. It is applied to the original file.
So you're targeting a proofer that's including transfer function already.
Your separations then will have to be reversed curved to the plate setter
then? Or do they just match the proof on the press by operator control?
Neil Snape email@hidden
http://mapage.noos.fr/nsnape
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.