Re: iProof's PowerRIP 2000 v 6.x
Re: iProof's PowerRIP 2000 v 6.x
- Subject: Re: iProof's PowerRIP 2000 v 6.x
- From: "Adriano Von Markendorf" <email@hidden>
- Date: Tue, 22 Oct 2002 12:47:22 -0200
----- Original Message -----
From: "Maarten van der Spek" <email@hidden>
To: <email@hidden>
Sent: Tuesday, October 22, 2002 1:10 PM
Subject: iProof's PowerRIP 2000 v 6.x
>
Hi all.
>
>
I need some advice to find the right setting to make reasonable color
proofs
>
with iProof's PowerRIP 2000 v 6.x, Quark XPress 4.11 and a Epson Styles
>
Photo 1270. On the composite printer I (mostly) want to simulate the
>
separation printer.
>
>
I think the RGB profile is in PowerRIP 2000 and in LaserWriter 8 always
the
>
monitor profile.
>
>
The CMYK profile can be the composite printer or separation profile. I'm
not
>
sure what setting is right in the next cases:
>
- Printer Setting in PowerRIP 2000 Setup Printing;
>
- Printer Profile in LaserWriter 8 printer dialog box Color Matching;
>
- CMYK Source in LaserWriter 8 printer dialog box Printer Specific Options
>
1.
>
>
An other question is what color matching method must be chosen in the
>
LaserWriter 8 printer dialog box Print Color: ColorSync Color Matching,
>
Color/Grayscale or PostScript Color Matching.
>
>
And finally I don't now if the settings in the LaserWriter 8 Printer
dialog
>
box are the same if colormanagment in Quark XPress 4.11 is active or it
>
isn't active.
>
>
I hope to receive your common,
>
>
Maarten van der Spek.
Until I know, you must to turn OFF, the CM option to print from Quark 4xx.
Evem if you use a RIP.
And setup only in the RIP (RIP printer driver) the color management options.
Quark 5xx could be a different history.
Luck,
Adriano von Markendorf email@hidden
"I-C-Cm vitamin's inside" Rio de Janeiro - Brazil
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.