Re: Problems with OptiCal monitor calibration software
Re: Problems with OptiCal monitor calibration software
- Subject: Re: Problems with OptiCal monitor calibration software
- From: Terry Wyse <email@hidden>
- Date: Tue, 03 Sep 2002 16:55:50 -0400
on 9/3/02 3:50 PM, email@hidden wrote:
>
> But a safe precaution will be after every calibration procedure, to check
>
> the ColorSync and Monitor control panel and see if the new profile has
>
> been assigned, otherwise set it manually.
>
>
This is standard procedure in my shop...and I re-check if something goes
>
wonky with my system and I have to do a hard reboot or something. Certainly
>
a good practice to get into!
Exactly. SOP should be:
1) Run optical and create profile.
2) Go to Monitors CP and see what profile is selected. Change if necessary.
3) Close Monitor CP and re-open. Is the profile still there?
4) Re-boot machine and check Monitor CP again. Is it STILL there?
Terry "Profile Paranoia" Wyse :-)
__________________________________
WyseConsul
Color Management Consulting
v 704.843.0858
e email@hidden
__________________________________
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.