Re: Hope for Epson drivers...
Re: Hope for Epson drivers...
- Subject: Re: Hope for Epson drivers...
- From: Richard Millott <email@hidden>
- Date: Wed, 15 Jan 2003 13:27:29 +1100
Bruce wrote:
>
> Also, the only neutral BW I've been able to get from the Epsons has
>
> been using the Colorbyte ImagePrint RIP, which treats the printer as
>
> an RGB device. As always, your milage may vary.
Then Dan wrote:
>
I have prints here from a 7600 that are dead on neutral under *all* light
>
sources made from CMYK ICC profile. I did cheat a bit and created a "Rich
>
Gray" CMYK profile for conversion with IccToolBox. Absolutely no color cross
>
overs in my prints and this was printed from a CMYK file. I had friend
>
confirm this so I wasn't fooling myself.
Dan,
I don't think that you cheated at all. I think that the RichGray solution
is so simple and elegant. I have a client who decided against upgrading
his 7500 to the 7600 because he was having so much trouble with neutrality.
He throught that the 7600 would solve the grayscale problems he was having.
The RichGray profile saved him an expensive printer upgrade. As long as you
have a good custom as a starting point, the conversion to absolute neutrality
is easy.
My vested interest with iccToolBox Pro, was as a beta tester.
Regards
Richard
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.