Re: PM 5.0 Scanner Profile question
Re: PM 5.0 Scanner Profile question
- Subject: Re: PM 5.0 Scanner Profile question
- From: neil snape <email@hidden>
- Date: Tue, 15 Jun 2004 07:53:16 +0200
on 15/06/2004 1:45, Steven Kornreich wrote :
>
Basically when I scan the Q60 Chart, I use HMI lights which cross polarized
>
and I have read with my I1, but my final prints will be viewed under
>
Tungsten lighting which I also read.
>
So in the Measure tool in 5.0 there is an option where I can change the
>
illuminant. Would I select my hmi or tungsten setting or neither. Would it
>
also be recommended to read the chart with the polarize filter?
The HMI light should be around 5500K yet some peaks in the blue region. You
can measure this on the spectral settings with the i1 and ambient light
adapter in i1 Match. If you are creating a camera profile (scanning as in
scanning back?) then use either D50 , 5500 K or the measured light for
camera profile creation.
The tungsten illuminant setting should be used for creation of only the
print profile as that's when the viewing is under tungsten lighting.
Neil Snape nsnape @ noos.fr neil_snape @ mac.com
http://mapage.noos.fr/nsnape
_______________________________________________
colorsync-users mailing list | email@hidden
Help/Unsubscribe/Archives:
http://www.lists.apple.com/mailman/listinfo/colorsync-users
Do not post admin requests to the list. They will be ignored.