Re: X-Rite Colorport (was edit profiles)
Re: X-Rite Colorport (was edit profiles)
- Subject: Re: X-Rite Colorport (was edit profiles)
- From: Dana Rasmussen <email@hidden>
- Date: Mon, 25 Jul 2005 09:07:22 -0700
On 7/25/05 5:48 AM, "Marc Levine" wrote:
> I am posting this response again as it may help a few others on this topic.
> (it looks like it didn't make it the first time).
>
>
> This should get you where you need to go. I should also note that - if it
> was your intention to make a target that that can be measured in Fuji, GMB,
> and X-Rite, that is one thing. If you were just looking for a quick way to
> get data from an ICColor target that you already built into MonacoPROFILER,
> you could have just exported the data out of MeasureTool (as an ECI dataset)
> and just imported it directly into the app.
>
> Hope this helps,
> Marc
Thanks for the info Marc.
The issue that I, and I think others were having was more getting the
ICColor to read the strips at all. The strips that the default settings
produce for the ICC are 90mm wide. My ICC, once the strips got much over
50-60 cm ( which is what you will have with the Xrite 1728 patch target on
a 24" printer for example) was unable to feed the target straight enough to
not error out before the end of the strip. Changing the target to give a
125mm strip as default has cured that issue.
That is really the only issue I had with ColorPort.
--
Dana Rasmussen
Seattle, WA
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden