Re : ProfileMaker 5 won't read a strip
Re : ProfileMaker 5 won't read a strip
- Subject: Re : ProfileMaker 5 won't read a strip
- From: "Mike Eddington" <email@hidden>
- Date: Wed, 23 Mar 2005 07:55:32 -0500
- Thread-topic: Re : ProfileMaker 5 won't read a strip
<The eyeone samples colour rapidly and
relies on contrast between patches to detect edges, otherwise it fails the
read. If you come across a strip that stubbornly refuses to read, you have a
couple of options :
< 1. Make a pen mark between some suspected patches that
appear to have low contrast, and try to read the strip again>
A very good suggestion, but the ECI2002CMYK i1(A3) chart already
has a 1mm white and 1mm black line vertically between all patches. So
unless one is using an older chart, this probably wouldn’t apply.
< 2. Switch to Patch mode, read the offending strip as
patches using the patch guide, then switch back to Strip mode and carry on
reading (hopefully) the rest of the chart as normal>
Always an option I suppose, but I haven’t the patience
any more …I’ll swipe and curse with the i1 all day long, but I won’t
read patches. ;-)
mike
|
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden