Re: Yellow too high on GRACoL 7
Re: Yellow too high on GRACoL 7
- Subject: Re: Yellow too high on GRACoL 7
- From: Graeme Gill <email@hidden>
- Date: Fri, 07 Apr 2006 01:16:19 +1000
Roberto Michelena wrote:
spectrophotometer, which reads it as bluish. Actually to be fair the
spectro is right, human vision is the one fooled, but let's say the
spectro fails to model this. A UV-filtered spectro helps in this case.
How will that help ? If the problem was due to FWA effects,
then using an instrument with a UV filter will cut out any FWA
effect. This makes the print look yellower to the instrument, so
it will compensate by making the device value more blue, thereby
making the original problem worse !
Graeme Gill.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden