Re: Yellow too high on GRACoL 7
Re: Yellow too high on GRACoL 7
- Subject: Re: Yellow too high on GRACoL 7
- From: Jim Rich <email@hidden>
- Date: Thu, 06 Apr 2006 11:39:26 -0400
- Thread-topic: Yellow too high on GRACoL 7
Title: Re: Yellow too high on GRACoL 7
Jon,
I am going to assume you are in the process of doing the first pressrun. In that part of the process you are really just printing as you normally print and then you are going to determine how you have to make changes in your CTP system to achieve the G7 curve and gray. So if that is the case, you might only run the yellow to 1.0 and not achieve gray balance.
Jim Rich
On 4/6/06 10:07 AM, "Jon Crook" <email@hidden> wrote:
Im in the process of fingerprinting right now (Its on press!) and I am having to run my yellow ink densities to 1.10 to achieve grey balance which is a little too high for us. We are hitting our lab values for cyan and magenta at the appropriate densities and when the lab values are met for yellow, our neutrals read a=.3 b=-6.75. When I raise the yellow density to 1.10 my lab values are off but my neutral lab values are right on. Can anyone advise me on the best way to proceed from here?
Help
Help!
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden