Re: Multiple Active Monitor Profiles with basICColor v4
Re: Multiple Active Monitor Profiles with basICColor v4
- Subject: Re: Multiple Active Monitor Profiles with basICColor v4
- From: Graeme Gill <email@hidden>
- Date: Thu, 21 Dec 2006 16:50:53 +1100
email@hidden wrote:
achieved by setting all of the optimized calibration targets to 5000. The
displays at 4800 and 5200 were very close to those which better approached
the 5000 native accuracy - however one could recognize those same displays
which had the 200 degree deviation as being very subtly below the quality
of the units which were natively closer to the 5000 degree target.
Correlated Color temperature doesn't tell you how accurate the
white point target is being met. It's a projection of 2 dimensions
onto 1 dimension (the daylight or Plankian locus), so you can have a
white point that is exactly 5000 degrees when projected on
the daylight locus, but is many delta E away from the white target.
Graeme Gill.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden