Re: Profiling a Xerox 3535
Re: Profiling a Xerox 3535
- Subject: Re: Profiling a Xerox 3535
- From: Dennis Dunbar <email@hidden>
- Date: Fri, 20 Jan 2006 14:31:32 -0800
At the Ad Agency I work at we have 2 Canon copiers that get a lot of heavy
use. After some experimentation I found that running the on-board
calibration routine then printing the profiling targets allowed me to build
profilse that have lasted remarkably well, the last profiles I made for them
was back in July and they're still giving acceptable results.
Every morning we run the on board calibration (about 5 minutes) and the
machines are good to go. If anyone complains about color during the day we
can re-run the calibration, but usually the root of the problem has been the
user's failure to follow the recipe. (What else is new, eh?)
My guess is that the Xerox would work fine the same way.
Dennis Dunbar
On 1/20/06 12:01 PM, "email@hidden"
<email@hidden> wrote:
> Any suggestions for profiing a connected copier, specifically the Xerox
> 3535 (doesn't use separate fuser oil)? It's operating under extremely
> stable temperatures, and will be calibrated daily. I'm worried most about
> the shifts with toner, and wondering how to mitigate the issues. Average
> five targets across a week under normal use? Should I bother? Thanks!
>
> -- Jeff Harmon
> Colorhythm LLC
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden