Solved my own dark Snow Leopard prints from Epson 7600
Solved my own dark Snow Leopard prints from Epson 7600
- Subject: Solved my own dark Snow Leopard prints from Epson 7600
- From: Wengam Mailbox for Notices <email@hidden>
- Date: Sun, 11 Oct 2009 20:53:59 -0400
Following advice here and elsewhere, prints from my Epson 7600 are now
the same as they were before Snow Leopard. But on first upgrading from
10.5.8 to 10.6.1 they were darker. I hope my solution may help others.
In both cases (10.5, 10.6) I printed with the same profile that I had
made in Monaco EZColor 2.6 in June 2009. As far as I could tell, the
print settings were the same in 10.6 as I had used in 10.5 (Photoshop
manages colors, no color adjustment in printer dialog, paper set to
'Watercolor Paper Radiant White', etc etc).
My upgrade to 10.6.1: I deleted the printer from 'Print&Fax' system
prefs, reinstalled the Leopard 10.5 driver from the Epson site
(epson12467.dmg) and then added the printer. But prints, apparently
with the same settings and profile as in Leopard, came out darker.
First I tried deleting /Library/Printers/ then reinstalling and re-
adding the printer; that did not help.
Eventually I discovered this note about 'default profiles' and the
need to re-set those when printing targets:
http://www.cwaynefox.com/Printing/Entries/2009/4/7_Changing_the_Printers_Default_ColorSync_profile.html
I read there with some surprise that default-profile setting was an
issue in Leopard, as well as Snow Leopard, but I had not known about
it, or implemented it, when I printed the targets for my June 2009
profile.
Before I made a new profile in Snow Leopard, I went into ColorSync
Utility and changed the profile 'Pro7600 Standard_PK' to point to
'Pro7600 Watercolor-RW_MK'. [I am printing on Hahnemuehle Photo Rag,
and I use 'Watercolor Paper Radiant White' in the printer settings, so
I guessed this was the correct profile to set as default].
Prints with the new profile in Snow Leopard look like the old profile
prints in Leopard. From my user point of view, the only difference was
changing the default profile setting before I printed the target.
I don't have the patience to go back into Leopard and try to make a
profile there with the default profile reset, but I'm offering this
experience in case anyone more expert than me can get an insight to
what I, and possibly others, were doing wrong.
I'm wondering if some users are working with profiles, their own or
third party, made like my June 2009 profile, without regard to default
profile setting, and only in Snow Leopard are they seeing a problem.
Thanks to those who posted information that helped me.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden