Re: i1profiler GCR favor/question
Re: i1profiler GCR favor/question
- Subject: Re: i1profiler GCR favor/question
- From: Mike Strickler <email@hidden>
- Date: Fri, 11 Nov 2011 13:29:55 -0800
Matt,
With 100% GCR setting, max K width (K start 30) I got only 42 32 37 5. If you start the black at 20% the 50 K will give more K (14%). With "Full Black Separation" and a K start of 30 I get 4 3 7 45; however, one would need to evaluate separations on press as this is very extreme GCR, and issues such as loss of gloss or instability might result.
Mike
> -----------------
>
> Message: 1
> Date: Fri, 11 Nov 2011 11:32:05 -0600
> From: Matt Louis <email@hidden>
> Subject: i1profiler GCR favor/question
> To: "email@hidden"
> <email@hidden>
> Message-ID: <CAE2B835.9E1C%email@hidden>
> Content-Type: text/plain; charset="us-ascii"
>
> If anyone has made an i1profiler profile with aggressive GCR using a standard sheetfed specification such as Gracol or Fogra39, would you be kind enough to share the result of the 50%K conversion when using the same profile as source and destination via absolute colorimetric.
>
> I am accustomed with Monaco to be able to get a resulting value set of C23 M16 Y17 K31. If Xrite had a fully functioning demo I would not be asking for your help (wink, nudge Mr. Xrite).
>
> Thank you,
> Matt Louis
>
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden