RE: i1Profiler & SpectroProofer Data
RE: i1Profiler & SpectroProofer Data
- Subject: RE: i1Profiler & SpectroProofer Data
- From: Ethan Hansen <email@hidden>
- Date: Tue, 18 Sep 2012 11:09:01 -0700
Tom,
With i1Profiler 1.3.2 (Windows version), the options for importing CGATS
measurement data are limited. If the measurements were made with a UV
filter, i.e. M2 data, i1Profiler 1.3.2 creates the profiles correctly. If
the measurements are unfiltered, M0 data, i1P complains that it "Could not
compute white point for condition M0 (UV Included)." This is new behavior
with v1.3.2; 1.2.0 did not have such quirks. Manually editing the file to
add "Filter=UVCut" to the MEASUREMENT_SOURCE section fools v1.3.2 into
being able to make the profile, although with incorrect white point
assumptions.
Cheers,
Ethan
Thomas Lianza wrote:
> Went into the i1Profiler RGB Measurement page and clicked the Load button.
> Switched from .mxf to CGATS and loaded the file.
> The CGATS from the SpectroProofer does not contain the Measurement mode or
the Cal reference so, you have to pick those. The measurement mode is going
to be M0 or M2
> depending upon which flavor of SpectroProofer the user has.
> The Calibration Standard should be GMDI as this device was tuned to the
SpectroProofer.
> The measurements then loaded right in and I made a profile just to make
sure the data was good.
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden