Re: iMac Monitor calibration
Re: iMac Monitor calibration
- Subject: Re: iMac Monitor calibration
- From: Spinnaker Photo Imaging Center <email@hidden>
- Date: Fri, 26 Apr 2013 14:34:52 -0700
Tom, I can understand what you are writing and what I perceive as frustration. Some digital folks, like me when I was just learning, wondered why any display cannot display the sameimage file regardless of the electronics inside of them. With classes and knowledge from digital industry folks, I learned. Was not instant, believe me!
For me I cannot use the lowest common denominator. I have one high end display and the MacBook Pro display. The two shall never
ever look alike. In my opinion!
Millers' Photography L.L.C.
David Miller, member
Spinnaker Photo Imaging Center
email@hidden
www.spinnakerphotoimagingcenter.com
360 739 2826
On Apr 26, 2013, at 2:25 PM, Thomas Vanderlinden <email@hidden> wrote:
> I don't understand--- -- - - -
>
> If we are saying here that we are unable to define a lowest-common-denominator,
> that both high end and mid-range monitors could be calibrated and profiled to,
> then I don't understand why not.
> (I also don't understand what you would want to do this.
> You would end up with two monitors with less display capacity
> than the cheaper one, if any part of the cheaper monitor's gamut
> exceeds that of the more expensive one.
> At best you're paying for something you're not using
> with the dumbed-down high end monitor.)
>
> If we are saying that there must be something wrong
> with our profiling equipment or technique
> if we can't make a mid-range monitor behave like an optimized high-end monitor,
> then I don't understand this conversation.
>
> - - - -- ---Tom Vanderlinden, 26 April 2013
>
> On Apr 26, 2013, at 4:54 PM, Spinnaker Photo Imaging Center <email@hidden> wrote:
>
>> I would assume, academically speaking of course, the MacBook Pro 8,3 17inch non-glare displays could visually match
>> the NEC PA 271i, sort of, according to Roger.
>>
>> One issue is density. However, what is to be done with RG and B?
>>
>> I would like more suggestions on this.
>>
>> I have tried for years to have my MacBook Pro's 4,1 and my two 8,3's get close in color, RGB. I have never succeeded. Density, yes. I use a solid medium gray
>> for background on all displays. When it comes to the colors, I quit. As I wrote, I have been doing this exercise for years…since 2008.
>>
>> My fantasy would be the two types of displays could match. Who else has this fantasy?
>>
>> Kind of reminds me of when ColorEyes Pro was available. What I misunderstood was ColorEyes Pro can not profile any monitor to match a high
>> end NEC PA 271w. In my amusing way, I was relating this to an antenna tuner. The antenna tuner could tune bedsprings for transmission and
>> reception. Oh well. I am always learning.
>>
>> Thanks all.
>>
>> Cheers
>>
>> David
>>
>> Millers' Photography L.L.C.
>> David Miller, member
>> Spinnaker Photo Imaging Center
>> email@hidden
>> www.spinnakerphotoimagingcenter.com
>> 360 739 2826
>>
>> On Apr 26, 2013, at 1:01 PM, Roger Breton <email@hidden> wrote:
>>
>>> It is possible, to some extent, to visually match the iMac to the NEC. But
>>> this needs to be done iteratively, empirically.
>>> Colorimetry alone, i.e. same calibrated XYZ white point off the two
>>> displays, will not result in a visual match, sadly.
>>>
>>> Not in my experience.
>>>
>>> Interesting problem...
>>>
>>> / Roger
>>>
>>> -----Original Message-----
>>> From: colorsync-users-bounces+graxx=email@hidden
>>> [mailto:colorsync-users-bounces+graxx=email@hidden] On
>>> Behalf Of Jim Lennon
>>> Sent: Friday, April 26, 2013 11:31 AM
>>> To: email@hidden
>>> Subject: Re: iMac Monitor calibration
>>>
>>>>
>>>> On Thu, 25 Apr 2013 09:27:50 -0700 David Miller wrote:
>>>>
>>>>
>>>> Regarding the critical profiling of the new iMac display, it will never
>>> every match the NEC display. It is just not built the way the independent
>>> NEC is.
>>>
>>>
>>> Is it possible to use a current iMac with an NEC like the one being
>>> described (or a Lacie 526, like I have) where the iMac is simply a location
>>> for tools, etc. and only the other monitor is calibrated? Can an Eye One
>>> Display2 be used to calibrate the other monitor?
>>>
>>> Thanks,
>>>
>>> Jim
>>>
>>>
>>> _______________________________________________
>>> Do not post admin requests to the list. They will be ignored.
>>> Colorsync-users mailing list (email@hidden)
>>> Help/Unsubscribe/Update your Subscription:
>>>
>>> This email sent to email@hidden
>>>
>>> _______________________________________________
>>> Do not post admin requests to the list. They will be ignored.
>>> Colorsync-users mailing list (email@hidden)
>>> Help/Unsubscribe/Update your Subscription:
>>>
>>> This email sent to email@hidden
>>
>>
>> _______________________________________________
>> Do not post admin requests to the list. They will be ignored.
>> Colorsync-users mailing list (email@hidden)
>> Help/Unsubscribe/Update your Subscription:
>>
>> This email sent to email@hidden
_______________________________________________
Do not post admin requests to the list. They will be ignored.
Colorsync-users mailing list (email@hidden)
Help/Unsubscribe/Update your Subscription:
This email sent to email@hidden